CCNA TEST PAPER 9 WITH ANSWERS V5-1 & V6-0


1 A collision fragment, also known as a ____frame, is a frame of fewer than 64 bytes in length.
ANSWER:RUNT

2 Which two statements describe features or functions of the logical link control sublayer in Ethernet standards? (Choose two.)
  • 1. Logical link control is implemented in software.
  • 2. Logical link control is specified in the IEEE 802.3 standard.
  • 3. The LLC sublayer adds a header and a trailer to the data.
  • 4. The data link layer uses LLC to communicate with the upper layers of the protocol suite.
  • 5. The LLC sublayer is responsible for the placement and retrieval of frames on and off the media.
ANSWER: 1&4

3 What statement describes Ethernet?
  • 1. It defines the most common LAN type in the world.
  • 2. It is the required Layer 1 and 2 standard for Internet communication.
  • 3. It defines a standard model used to describe how networking works.
  • 4. It connects multiple sites such as routers located in different countries.
ANSWER:1

4 What are the two sizes (minimum and maximum) of an Ethernet frame? (Choose two.)
  • 1. 56 bytes
  • 2. 64 bytes
  • 3. 128 bytes
  • 4. 1024 bytes
  • 5. 1518 bytes
ANSWER: 2&5

5 What statement describes a characteristic of MAC addresses?
  • 1. They must be globally unique.
  • 2. They are only routable within the private network.
  • 3. They are added as part of a Layer 3 PDU.
  • 4. They have a 32-bit binary value.
ANSWER:1

6 What is auto-MDIX?
  • 1. a type of Cisco switch
  • 2. An Ethernet connector type
  • 3. a type of port on a Cisco switch
  • 4. a feature that detects Ethernet cable type
ANSWER: 4

7 Which destination address is used in an ARP request frame?
  • 1. 0.0.0.0
  • 2. 255.255.255.255
  • 3. FFFF.FFFF.FFFF
  • 4. 127.0.0.1
  • 5. 01-00-5E-00-AA-23
ANSWER:3

8 What addressing information is recorded by a switch to build its MAC address table?
  • 1. the destination Layer 3 address of incoming packets
  • 2. the destination Layer 2 address of outgoing frames
  • 3. the source Layer 3 address of outgoing packets
  • 4. the source Layer 2 address of incoming frames
ANSWER:4

9 The ARP table in a switch maps which two types of address together?
  • 1. Layer 3 address to a Layer 2 address
  • 2. Layer 3 address to a Layer 4 address
  • 3. Layer 4 address to a Layer 2 address
  • 4.Layer 2 address to a Layer 4 address
ANSWER: 1

10 Which switching method uses the CRC value in a frame?
  • 1. cut-through
  • 2. fast-forward
  • 3. fragment-free
  • 4. store-and-forward
ANSWER: 4

Comments

Post a Comment

Popular posts from this blog

CCNA TEST PAPER 6 WITH ANSWERS V5-1 & V6-0

1 What method can be used by two computers to ensure that packets are not dropped because too much data is being sent too quickly? 1. encapsulation 2. flow control 3.  access method 4. response timeout ANSWER:2 2 What will happen if the default gateway address is incorrectly configured on a host? 1. The host cannot communicate with other hosts in the local network. 2. The switch will not forward packets initiated by the host. 3. The host will have to use ARP to determine the correct address of the default gateway. 4. The host cannot communicate with hosts in other networks. 5. A ping from the host to 127.0.0.1 would not be successful. ANSWER:4 3 What type of communication will send a message to all devices on a local area network? 1. broadcast 2. multicast 3. unicast 4. allcast ANSWER:1 4 What is an advantage of using standards to develop and implement protocols? 1. ...
Read more

CCNA TEST PAPER 1 WITH ANSWERS V5-1 & V6-0

1. Which two host names follow the guidelines for naming conventions on Cisco IOS devices? (Choose two.) 1. Branch2! 2. RM-3-Switch-2A4 3. Floor(15) 4. HO Floor 17 5. SwBranch799 ANSWER: 2&5 2. What is a user trying to determine when issuing a ping 10.1.1.1 command on a PC? 1. if the TCP/IP stack is functioning on the PC without putting traffic on the wire 2. if there is connectivity with the destination device 3. the path that traffic will take to reach the destination 4. what type of device is at the destination ANSWER:2 3. What command can be used on a Windows PC to see the IP configuration of that computer? 1. ping 2. ipconfig 3. show interfaces 4. show ip interface brief ANSWER:2 4.How does the service password-encryption command enhance password security on Cisco routers and switches? 1. It encrypts passwords as they are sent across the network. 2. It e...
Read more

CCNA TEST PAPER 8 WITH ANSWERS V5-1 & V6-0

1 What is contained in the trailer of a data-link frame? 1. logical address 2. physical address 3.  data 4. error detection ANSWER: 4                               2 What is true concerning physical and logical topologies? 1. The logical topology is always the same as the physical topology. 2. Physical topologies are concerned with how a network transfers frames. 3. Physical topologies display the IP addressing scheme of each network. 4. Logical topologies refer to how a network transfers data between devices ANSWER: 4 3 Which type of connector does a network interface card use? 1. DIN 2. PS-2 3. RJ-11 4. RJ-45 ANSWER:4 4 Which statement describes an extended star topology? 1. End devices connect to a central intermediate device, whic...
Read more