CCNA TEST PAPER 1 WITH ANSWERS V5-1 & V6-0


1. Which two host names follow the guidelines for naming conventions on Cisco IOS devices? (Choose two.)
  • 1. Branch2!
  • 2. RM-3-Switch-2A4
  • 3. Floor(15)
  • 4. HO Floor 17
  • 5. SwBranch799
ANSWER: 2&5
2. What is a user trying to determine when issuing a ping 10.1.1.1 command on a PC?
  • 1. if the TCP/IP stack is functioning on the PC without putting traffic on the wire
  • 2. if there is connectivity with the destination device
  • 3. the path that traffic will take to reach the destination
  • 4. what type of device is at the destination
ANSWER:2
3. What command can be used on a Windows PC to see the IP configuration of that computer?
  • 1. ping
  • 2. ipconfig
  • 3. show interfaces
  • 4. show ip interface brief
ANSWER:2
4.How does the service password-encryption command enhance password security on Cisco routers and switches?
  • 1. It encrypts passwords as they are sent across the network.
  • 2. It encrypts passwords that are stored in router or switch configuration files.
  • 3. It requires that a user type encrypted passwords to gain console access to a router or switch.
  • 4. It requires encrypted passwords to be used when connecting remotely to a router or switch with Telnet.
ANSWER:2
5. Which interface is the default SVI on a Cisco switch?
  • 1. FastEthernet 0/1
  • 2. GigabitEthernet 0/1
  • 3. VLAN 1
  • 4. VLAN 99
ANSWER:3
6. Which statement is true about the running configuration file in a Cisco IOS device?
  • 1. It affects the operation of the device immediately when modified.
  • 2. It is stored in NVRAM.
  • 3.  It should be deleted using the erase running-config command.
  • 4. It is automatically saved when the router reboots.
ANSWER:1
7. Which interface allows remote management of a Layer 2 switch?
  • 1. the AUX interface
  • 2. the console port interface
  • 3. the switch virtual interface
  • 4. the first Ethernet port interface
ANSWER:3

8. Why is it important to configure a hostname on a device?
  • 1. a Cisco router or switch only begins to operate when its hostname is set
  • 2. a hostname must be configured before any other parameters
  • 3. to identify the device during remote access (SSH or telnet)
  • 4. to allow local access to the device through the console port
ANSWER:3
9. What are two characteristics of RAM on a Cisco device? (Choose two.)
  • 1. RAM provides nonvolatile storage.
  • 2. The configuration that is actively running on the device is stored in RAM.
  • 3. The contents of RAM are lost during a power cycle.
  • 4. RAM is a component in Cisco switches but not in Cisco routers.
  • 5. RAM is able to store multiple versions of IOS and configuration files.
ANSWER:2&3

10. Which command or key combination allows a user to return to the previous level in the command hierarchy?
  • 1. end
  • 2. exit
  • 3. Ctrl-Z
  • 4. Ctrl-C
ANSWER :2

Comments

Post a Comment

Popular posts from this blog

CCNA TEST PAPER 6 WITH ANSWERS V5-1 & V6-0

1 What method can be used by two computers to ensure that packets are not dropped because too much data is being sent too quickly? 1. encapsulation 2. flow control 3.  access method 4. response timeout ANSWER:2 2 What will happen if the default gateway address is incorrectly configured on a host? 1. The host cannot communicate with other hosts in the local network. 2. The switch will not forward packets initiated by the host. 3. The host will have to use ARP to determine the correct address of the default gateway. 4. The host cannot communicate with hosts in other networks. 5. A ping from the host to 127.0.0.1 would not be successful. ANSWER:4 3 What type of communication will send a message to all devices on a local area network? 1. broadcast 2. multicast 3. unicast 4. allcast ANSWER:1 4 What is an advantage of using standards to develop and implement protocols? 1. ...
Read more

CCNA TEST PAPER 8 WITH ANSWERS V5-1 & V6-0

1 What is contained in the trailer of a data-link frame? 1. logical address 2. physical address 3.  data 4. error detection ANSWER: 4                               2 What is true concerning physical and logical topologies? 1. The logical topology is always the same as the physical topology. 2. Physical topologies are concerned with how a network transfers frames. 3. Physical topologies display the IP addressing scheme of each network. 4. Logical topologies refer to how a network transfers data between devices ANSWER: 4 3 Which type of connector does a network interface card use? 1. DIN 2. PS-2 3. RJ-11 4. RJ-45 ANSWER:4 4 Which statement describes an extended star topology? 1. End devices connect to a central intermediate device, whic...
Read more