CCNA TEST PAPER 2 WITH ANSWERS V5-1 & V6-0


1. While trying to solve a network issue, a technician made multiple changes to the current router configuration file. The changes did not solve the problem and were not saved. What action can the technician take to discard the changes and work with the file in NVRAM?
  • 1. Issue the reload command without saving the running configuration.
  • 2. Delete the vlan.dat file and reboot the device.
  • 3. Close and reopen the terminal emulation software.
  • 4. Issue the copy startup-config running-config command.
ANSWER:1
2. Which two functions are provided to users by the context-sensitive help feature of the Cisco IOS CLI? (Choose two.)
  • 1. providing an error message when a wrong command is submitted
  • 2. displaying a list of all available commands within the current mode
  • 3. allowing the user to complete the remainder of an abbreviated command with the TAB key
  • 4. determining which option, keyword, or argument is available for the entered command
  • 5. selecting the best command to accomplish a task
ANSWER:2&4
3. what is the function of the kernel of an operating software?
  • 1. It provides a user interface that allows users to request a specific task.
  • 2.The kernel links the hardware drivers with the underlying electronics of a computer.
  • 3.It is an application that allows the initial configuration of a Cisco device.
  • 4.It kernel provisions hardware resources to meet software requirements.
ANSWER:4

4. Which information does the show startup-config command display?
  • 1. The IOS image copied into RAM
  • 2. The bootstrap program in the ROM
  • 3. the contents of the current running configuration file in the RAM
  • 4. the contents of the saved configuration file in the NVRAM
ANSWER:4
5. A router has a valid operating system and a configuration file stored in NVRAM. The configuration file contains an enable secret password but no console password. When the router boots up, which mode will display?
  • 1. global configuration mode
  • 2. setup mode
  • 3. privileged EXEC mode
  • 4. user EXEC mode
ANSWER:4

6. Why would a Layer 2 switch need an IP address?
  • 1. to enable the switch to send broadcast frames to attached PCs
  • 2. to enable the switch to function as a default gateway
  • 3. to enable the switch to be managed remotely
  • 4. to enable the switch to receive frames from attached PCs
ANSWER:3
7. Which procedure is used to access a Cisco 2960 switch when performing an initial configuration in a secure environment?
  • 1. Use Telnet to remotely access the switch through the network.
  • 2. Use the console port to locally access the switch from a serial or USB interface of the PC.
  • 3. Use Secure Shell to remotely access the switch through the network.
  • 4. Use the AUX port to locally access the switch from a serial or USB interface of the PC
ANSWER:2

8. A technician is adding a new PC to a LAN. After unpacking the components and making all the connections, the technician starts the PC. After the OS loads, the technician opens a browser, and verifies that the PC can reach the Internet. Why was the PC able to connect to the network with no additional configuration?
  • 1. The PC does not require any additional information to function on the network.
  • 2. The PC came preconfigured with IP addressing information from the factory.
  • 3. The PC was preconfigured to use DHCP.*
  • 4. The PC used DNS to automatically receive IP addressing information from a server.
  • 5. The PC virtual interface is compatible with any network.
ANSWER:3
9.A network administrator needs to keep the user ID, password, and session contents private when establishing remote CLI connectivity with a switch to manage it. Which access method should be chosen?
  • 1. Telnet
  • 2. Console
  • 3. AUX
  • 4. SSH
ANSWER 4

Comments

Post a Comment

Popular posts from this blog

CCNA TEST PAPER 6 WITH ANSWERS V5-1 & V6-0

1 What method can be used by two computers to ensure that packets are not dropped because too much data is being sent too quickly? 1. encapsulation 2. flow control 3.  access method 4. response timeout ANSWER:2 2 What will happen if the default gateway address is incorrectly configured on a host? 1. The host cannot communicate with other hosts in the local network. 2. The switch will not forward packets initiated by the host. 3. The host will have to use ARP to determine the correct address of the default gateway. 4. The host cannot communicate with hosts in other networks. 5. A ping from the host to 127.0.0.1 would not be successful. ANSWER:4 3 What type of communication will send a message to all devices on a local area network? 1. broadcast 2. multicast 3. unicast 4. allcast ANSWER:1 4 What is an advantage of using standards to develop and implement protocols? 1. ...
Read more

CCNA TEST PAPER 1 WITH ANSWERS V5-1 & V6-0

1. Which two host names follow the guidelines for naming conventions on Cisco IOS devices? (Choose two.) 1. Branch2! 2. RM-3-Switch-2A4 3. Floor(15) 4. HO Floor 17 5. SwBranch799 ANSWER: 2&5 2. What is a user trying to determine when issuing a ping 10.1.1.1 command on a PC? 1. if the TCP/IP stack is functioning on the PC without putting traffic on the wire 2. if there is connectivity with the destination device 3. the path that traffic will take to reach the destination 4. what type of device is at the destination ANSWER:2 3. What command can be used on a Windows PC to see the IP configuration of that computer? 1. ping 2. ipconfig 3. show interfaces 4. show ip interface brief ANSWER:2 4.How does the service password-encryption command enhance password security on Cisco routers and switches? 1. It encrypts passwords as they are sent across the network. 2. It e...
Read more

CCNA TEST PAPER 8 WITH ANSWERS V5-1 & V6-0

1 What is contained in the trailer of a data-link frame? 1. logical address 2. physical address 3.  data 4. error detection ANSWER: 4                               2 What is true concerning physical and logical topologies? 1. The logical topology is always the same as the physical topology. 2. Physical topologies are concerned with how a network transfers frames. 3. Physical topologies display the IP addressing scheme of each network. 4. Logical topologies refer to how a network transfers data between devices ANSWER: 4 3 Which type of connector does a network interface card use? 1. DIN 2. PS-2 3. RJ-11 4. RJ-45 ANSWER:4 4 Which statement describes an extended star topology? 1. End devices connect to a central intermediate device, whic...
Read more