CCNA TEST PAPER 6 WITH ANSWERS V5-1 & V6-0


1 What method can be used by two computers to ensure that packets are not dropped because too much data is being sent too quickly?
  • 1. encapsulation
  • 2. flow control
  • 3.  access method
  • 4. response timeout
ANSWER:2
2 What will happen if the default gateway address is incorrectly configured on a host?
  • 1. The host cannot communicate with other hosts in the local network.
  • 2. The switch will not forward packets initiated by the host.
  • 3. The host will have to use ARP to determine the correct address of the default gateway.
  • 4. The host cannot communicate with hosts in other networks.
  • 5. A ping from the host to 127.0.0.1 would not be successful.
ANSWER:4


3 What type of communication will send a message to all devices on a local area network?
  • 1. broadcast
  • 2. multicast
  • 3. unicast
  • 4. allcast
ANSWER:1
4 What is an advantage of using standards to develop and implement protocols?
  • 1. A particular protocol can only be implemented by one manufacturer.
  • 2. Products from different manufacturers can interoperate successfully.
  • 3. Different manufacturers are free to apply different requirements when implementing a protocol.
  • 4. Standards provide flexibility for manufacturers to create devices that comply with unique requirements.
ANSWER:2

5 Which address does a NIC use when deciding whether to accept a frame?
  • 1. source IP address
  • 2. source MAC address
  • 3. destination IP address
  • 4. destination MAC address
  • 5. source Ethernet address
ANSWER:4
6 At which layer of the OSI model would a logical address be encapsulated?
  • 1. physical layer
  • 2. data link layer
  • 3. network layer
  • 4. transport layer
ANSWER:3

7 Which characteristic describes the default gateway of a host computer?
  • 1. the logical address of the router interface on the same network as the host computer
  • 2. the physical address of the switch interface connected to the host computer
  • 3. the physical address of the router interface on the same network as the host computer
  • 4. the logical address assigned to the switch interface connected to the router
ANSWER:1

Comments

Post a Comment

Popular posts from this blog

CCNA TEST PAPER 1 WITH ANSWERS V5-1 & V6-0

1. Which two host names follow the guidelines for naming conventions on Cisco IOS devices? (Choose two.) 1. Branch2! 2. RM-3-Switch-2A4 3. Floor(15) 4. HO Floor 17 5. SwBranch799 ANSWER: 2&5 2. What is a user trying to determine when issuing a ping 10.1.1.1 command on a PC? 1. if the TCP/IP stack is functioning on the PC without putting traffic on the wire 2. if there is connectivity with the destination device 3. the path that traffic will take to reach the destination 4. what type of device is at the destination ANSWER:2 3. What command can be used on a Windows PC to see the IP configuration of that computer? 1. ping 2. ipconfig 3. show interfaces 4. show ip interface brief ANSWER:2 4.How does the service password-encryption command enhance password security on Cisco routers and switches? 1. It encrypts passwords as they are sent across the network. 2. It e...
Read more

CCNA TEST PAPER 8 WITH ANSWERS V5-1 & V6-0

1 What is contained in the trailer of a data-link frame? 1. logical address 2. physical address 3.  data 4. error detection ANSWER: 4                               2 What is true concerning physical and logical topologies? 1. The logical topology is always the same as the physical topology. 2. Physical topologies are concerned with how a network transfers frames. 3. Physical topologies display the IP addressing scheme of each network. 4. Logical topologies refer to how a network transfers data between devices ANSWER: 4 3 Which type of connector does a network interface card use? 1. DIN 2. PS-2 3. RJ-11 4. RJ-45 ANSWER:4 4 Which statement describes an extended star topology? 1. End devices connect to a central intermediate device, whic...
Read more